Hanteer 5-stuk monteermasjien

The trigger body is transported by the material rail and smoothly enters the designated station. Then the inspection process is carried out to ensure that the trigger body is in the corresponding station. Nadat die inspeksie voltooi is, the trigger body is oiled to prepare for the subsequent process.

After the oiling process is completed, the turntable continues to rotate, the spring starts to be fed, and is inspected simultaneously. There is a spring at the inspection station, which is immediately assembled with the trigger body that has been oiled and inspected.

After the assembly is completed, the turntable rotates again, and the piston rod and the positioning seat are fed with the help of the vibration plate. Nadat die voeding voltooi is, the piston rod is first inspected, and then the positioning seat is accurately pressed into the corresponding position.

After completing this process, die roterende skyf bly draai, and the wrench is fed through the rail. After the wrench reaches the designated position, the assembly operation is carried out. After the assembly is completed, the inspection work is immediately carried out.

The rotating disk continues to rotate, and the other trigger is tested for sealing to strictly control the product quality. After the sealing test, the rotating disk rotates to the outlet, where the finished product and defective products are carefully selected.

The selection process is completed, die roterende skyf bly draai, and the product is tested at the delivery station. Indien geen produk by die produksiestasie opgespoor word nie, die toerusting sal normale werking handhaaf; if the presence of a product is detected, the equipment will quickly trigger the error reporting mechanism and automatically make adjustments to ensure that subsequent production processes can continue to proceed smoothly and stably.