Lotionpumpen, også kendt som push-type lotionpumpe, is a liquid dispenser that uses the principle of atmospheric balance to pump out the liquid in the bottle by pressing and replenishing the external atmosphere into the bottle.
01. the working principle of the lotion pump
When the pressing head is pressed for the first time, the pressing head drives the piston head to compress the spring together through the connected connecting rod; in the process of compressing the spring, the outer wall of the piston rubs against the inner cavity wall of the cylinder, which causes the piston to open the discharge hole of the piston head; the piston goes down When sliding, the air in the cylinder is discharged through the discharge hole of the piston head that has been opened.
Press several times to exhaust all the air in the cylinder.
Press the pressing head by hand to discharge the air in the cylinder through the connecting rod, the piston head, and the piston, and compress the spring together to discharge the air in the cylinder, then release the pressing head, the spring moves back (up) due to the loss of pressure, and the piston also rubs the inner wall of the cylinder at this time. Move down to close the discharge hole of the piston head. At this time, the liquid storage chamber in the cylinder forms a vacuum suction state, the ball valve is sucked up, and the liquid in the bottle is sucked into the cylinder liquid storage chamber through the straw.
Press the pressing head several times, and store the liquid into the cylinder through several suctions until the liquid is full.
02. the performance parameters of the lotion pump
The pump output is the first important parameter of a lotion pump. It is related to many factors such as the seal of the pump head and the tolerance of the parts.
The number of air pressures/number of first sprays is another important consumer experience parameter and an important quality standard in the production process.
Minimal downforce is a factor especially valued at the top end of the market.
The leak function design is the most important lotion pump parameter. Sealing, which may seem like a parametric requirement, involves all the interconnected parts of the lotion pump structure.
The major manufacturers of emulsion pumps, in addition to controlling some main functions and parameters, will also add many additional functions according to different customer needs, as well as some new design features to attract the attention of end customers and form new Profit growth. Such as the control of the opening torque of the pressing head, the control of the separation force between the pressing head and the piston rod, the rebound time of the pressing head, the anti-water ingress function, and the anti-counterfeiting function, the spring external structure emulsion pump and so on.
