Handle 5-piece Assembly Machine

The trigger body is transported by the material rail and smoothly enters the designated station. Then the inspection process is carried out to ensure that the trigger body is in the corresponding station. After the inspection is completed, the trigger body is oiled to prepare for the subsequent process. After the oiling process is completed, the turntable continues to rotate, the spring starts to be fed, and is inspected simultaneously. There is a spring at the inspection station, which is immediately assembled with the trigger body that has been oiled and inspected. After the assembly is completed, the turntable rotates again, and the piston rod and the positioning seat are fed with the help of the vibration plate. Nach Abschluss der Fütterung, the piston rod is first inspected, and then the positioning seat is accurately pressed into the corresponding position. After completing this process, Die rotierende Scheibe dreht sich weiterhin, and the wrench is fed through the rail. After the wrench reaches the designated position, the assembly operation is carried out. After the assembly is completed, the inspection work is immediately carried out. The rotating disk continues to rotate, and the other trigger is tested for sealing to strictly control the product quality. After the sealing test, the rotating disk rotates to the outlet, where the finished product and defective products are carefully selected. The selection process is completed, Die rotierende Scheibe dreht sich weiterhin, and the product is tested at the delivery station. Wenn an der Produktionsstation kein Produkt festgestellt wird, Die Ausrüstung wird den normalen Betrieb aufrechterhalten; if the presence of a product is detected, the equipment will quickly trigger the error reporting mechanism and automatically make adjustments to ensure that subsequent production processes can continue to proceed smoothly and stably