SR-LPM-01 Lotion Pump Assembly Machine

  • Dual-channel design to ensure production capacity
  • Multi-station installation to improve production efficiency
  • Probleemide paremaks tuvastamiseks ja tööaja lühendamiseks on olemas toote pärandi tuvastamise protsess
  • Kui masin on materialist puudu, Valgus vilgub ja kuvatakse rikke asukoht
  • The equipment is simple and easy to operate, and one worker can take care of 2-3 units

Lisainformatsioon

Funktsioon

Piston 3-piece automatic assembly machine

Tootemudel

SR-LPM-01

Tarnekuupäev

90 päevadel

Tootmisvõimsus

100-130 PCS/min

Dimensioon(l*w*h)

1.2m*1.2m*1.8m

Pinge

Standard 220V, Kohandatav

Machine
Masin
Lae alla: Piston Rod 3 Pcs Assembly Machine Main ↑

Spetsifikatsioon

The piston rod is fed in an orderly manner through the vibration plate and arrives at the corresponding station accurately for inspection. After the inspection is completed, the rotating plate rotates smoothly, and the piston is fed to the corresponding station with the help of the vibration plate, and installed with the piston rod that has completed the inspection. After the installation is completed, the rotating plate rotates again, and the detection device at this station will determine whether there is a product. If there is a product, the bottom valve is immediately fed through the vibration plate and assembled with the previous parts. After the assembly is completed, the rotating plate continues to run to the finished product and defective product selection station to select products according to established standards. The rotating plate then continues to rotate, and when it reaches the production station, it is checked again whether there is a product here. If no product is detected, the rotating plate keeps running and a new round of production process is started; if a product is detected, the error reporting mechanism is triggered, and the relevant personnel immediately conduct problem investigation and adjustment.

Meie tehas

Monteerimismasina tehas

Meie kujundus

Monteerimismasina kujundus

Meie teenused

Our Service

Tootmisprotsess

Production Process

Meie näitused

Assembly Machine Exhibition

Miks valida meid

Jah, proovid on tasuta. Kuid kiirkulu on ostja kontol.
Saatmisviisid: EMS, DHL, FedEx, UPS, TNT, Hiina post, jne.

Jah. Oleme kaubandus- ja tootmisettevõte, saame kaupu ise eksportida.

Täielik kontroll monteerimisliinil professionaalse masinaga.
Valmistoote ja pakendi kontroll.

Kaubandustingimused: FOB &CIF ,C&F jne. Maksetähtaeg : T/T , 30% deposiidina, 70% enne saatmist.Valmistoote ja pakendi kontroll.

Ausalt, see sõltub tellimuse kogusest ja hooajast, mil tellimuse esitate. Tavaliselt, kohaletoimetamine on umbes 30-35 päevadel.

Meil on suurepäraste disaineritega arendusmeeskond, kes kujundab uusi tooteid vastavalt kliendi nõudmistele.

Tootepäring

Andmekaitse

Andmekaitseseaduste täitmiseks, palume teil hüpikaknas üle vaadata põhipunktid. Meie veebisaidi kasutamise jätkamiseks, peate klõpsama nuppu "Nõustu". & Sulge'. Lisateavet saate lugeda meie privaatsuspoliitika kohta. Dokumenteerime teie lepingu ja saate sellest loobuda, minnes meie privaatsuspoliitikasse ja klõpsates vidinal.