Bedekke & Tube ynfoegje assemblage-masine

The cover of the trigger sprayer is fed through the material rail, and the turntable starts to rotate to detect whether there is a cover on each station. Once the cover is detected, it is immediately positioned. Gewege, de draaitafel bliuwt draaie, and the gun body completes the loading process through the elevator, and the relevant detection process is started at the same time. When the cover and the gun body are ready, the two are installed.

After the installation is completed, the turntable rotates again to detect whether there are assembled products at the corresponding station. If the product exists, the trigger sprayer immediately performs the insertion operation, and the trigger sprayer that has completed the insertion needs to be inspected again. Immediately afterwards, the turntable rotates to the defective station, where the staff selects and classifies the products. Dêrnei, the turntable continues to rotate and the product is inspected at the output station. If it is detected that there is no product at the station, the equipment continues to operate normally; if it is detected that there is a product, the equipment immediately triggers the error reporting mechanism and automatically makes corresponding adjustments.