6-කෑල්ලක් සම්පූර්ණ කරන ලද සිහින් මීදුම එකලස් කිරීමේ යන්ත්‍රය

6-කෑල්ලක් සම්පූර්ණ කරන ලද සිහින් මීදුම එකලස් කිරීමේ යන්ත්‍රය

The automated assembly procedure for the pump head starts with the exact manufacture of its main components. මුලින්ම, the production line feeds and detects the pump core component to guarantee that everything begins on the right footing. To ensure the product’s seal, the system automatically installs the gasket and does a sensor check. A closure is then supplied, identified, and precisely pressed into position to secure the core components and finish the first assembly of the main pump body.

The process of adding the external components begins after the core section is assembled. The head cap is an important part for both function and appearance. It is placed and recognized before being pushed onto the pump body. To protect the internal parts and finish the product’s look, a clear cover is added, checked, and pressed in place. At this point, the main construction and outside of the pump head are nearly finished.

අවසාන වශයෙන්, the procedure is completed with the installation of functional components and final quality control. The device puts the suction tube into the pump. It then quickly checks to make sure this important part is installed correctly. After all assembly stages are done, the line checks each unit. It uses the results from earlier checkpoints. එහෙනම්, it automatically labels the unit as either finished (good) or defective. This closes the loop for both manufacturing and quality assurance.