SR-DBM-01 Dropper Assembly Production Equipment

Name: SR-DBM-01 Dropper Assembly Production Equipment
Brand: Songmile Packaging
Author: Zu, Tingting

Accurate positioning, timely selection of defective products
The length of the dropper can be adjusted according to the customer’s size, up to 100mm
There is a product legacy detection process to better identify problems and shorten operation time
When the machine is short of material, the light will flash and the fault location will be displayed
Shaashadda taabashada, hawlgal fudud

Xog dheeraad ah

Xog dheeraad ah	collar,nipple,glass tube automatic assembly machine
Isku xigxiga Golaha	Closure feeding detection → Nipple feeding detection → Nipple pressing and tightening → Dropper feeding detection → Finished&defective product discharge
Moodeelka wax soo saarka	SR-DBM-01
Taariikh gaarsiinta	90 Xog dheeraad ah
Awoodda soo-saarka	60-66 PCS / MIN
Cabbir dhan kasta ah(l * w * h)	4m5.2m2.1m
Maanyo danab	Heerka 220v, Diyaafad

Xog dheeraad ah: 3 Piece Of Dropper Assembly Machine ↑

Cayimid

Stage 1: Collar Feeding & Positioning

Feeding: Place the dropper ring and feed it through the conveyor belt.
Positioning: When the Collar enters the workstation, the conveyor belt flips.

Stage 2: Assembly on Rotating Disk

Inspection: The rotating disk rotates, and the Collar is turned to the inspection station.
- Action: Check whether there is a Collar at the inspection station.
Rubber Head Assembly: The rotating disk continues to rotate and turns to the station where it is assembled with the dropper rubber head.
- Parallel Action: The rubber head enters the corresponding track through the feeding conveyor belt.
Ku habboon: The Collar is matched with the rubber head.
Pressing: The rotating disk continues to rotate, and the Collar and the rubber head are firmly assembled.
Dropper Assembly: The rotating disk continues to rotate to the dropper station.
- Action: Match the three-piece set, fix and press the dropper and the Collar rubber head.

Stage 3: Final Output & System Check

Ejection: The rotating disk rotates to the product outlet.
Sorting: Finished and defective products are selected.
System Reset & Check: The rotating disk continues to rotate and detects whether there is a product at the production station.
Process Control:
- If there is no product, it continues to run.
- If there is a product, error adjustment is made.

Xog dheeraad ah

Naqshadeyntayadu

Xog dheeraad ah

Bandhigyadayada

Xog dheeraad ah

1. Xog dheeraad ah?

Xog dheeraad ah, Xog dheeraad ah. Xog dheeraad ah.
Xog dheeraad ah: Xog dheeraad ah, Xog dheeraad ah, Xog dheeraad ah, Xog dheeraad ah, Xog dheeraad ah, Shiinaha Post, iwm.

2. Xog dheeraad ah? Xog dheeraad ah?

Xog dheeraad ah. Xog dheeraad ah, Xog dheeraad ah.

3. Xog dheeraad ah?

Xog dheeraad ah.
Xog dheeraad ah.

4. Xog dheeraad ah?

Xog dheeraad ah: Xog dheeraad ah &Xog dheeraad ah ,Xog dheeraad ah&Xog dheeraad ah. Mudada lacag bixinta : Mudada lacag bixinta , 30% Mudada lacag bixinta, 70% ka hor inta aan la dhoofin.Dhammaadka hubinta alaabta iyo baakadaha.

5. Mudada lacag bixinta?

Mudada lacag bixinta, Mudada lacag bixinta. Mudada lacag bixinta, Mudada lacag bixinta 30-35 Xog dheeraad ah.

6. Mudada lacag bixinta?

Mudada lacag bixinta.

Muuqaal & Raadi wax badan oo FAQs ah

Guji si aad u tagto

Mudada lacag bixinta