Clip Pump Body 5 Mashine ya mkutano wa kipande

SR-CPM-01 Clip Pump Body 5-piece Assembly Machine

Name: SR-CPM-01 Clip Pump Body 5-piece Assembly Machine
Brand: Songmile Packaging
Author: Zu, Tingting

The dual-channel, multi-station architecture offers great production efficiency and capacity.
An in-process detection system ensures product quality by automatically rejecting defective goods and immediately detecting flaws.
A smart alarm system with a location display makes operation easier by immediately alerting personnel to material shortages or faults.
The simple design saves labor costs. It lets one worker easily control two to three units at the same time.

Chupa za Plastiki

Chupa za Plastiki	Clip Pump Body 5-piece Assembly Machine
Mlolongo wa mkutano	Pump Housing → feeding Ball feeding → Spring feeding/testing →Piston rod feeding → Piston feeding/testing → Closure feeding/testing → Finished&kutokwa kwa bidhaa kasoro
Mfano wa bidhaa	SR-CPM-01
Tarehe ya utoaji	90 Chupa za Plastiki
Uwezo wa uzalishaji	55~60 pcs/min
Mwelekeo(lwh)	2.0mx1.8mx2.0m
Voltage	Kiwango cha 220V, Custoreable

Chupa za Plastiki: Clip Pump Body 5 Mashine ya mkutano wa kipande ↑

Uainishaji

This machine’s assembly process involves two parallel sub-assembly lines that merge for final assembly

Line 1: Pump Body Sub-Assembly

Pump Body & Gasket Assembly: The pump body and gasket are fed via a track and assembled together.
Glass Ball Feeding: A glass ball is accurately placed into the pump body.
Spring Installation: Aliita kifuniko hiki, a spring is installed onto the pump body assembly.

Line 2: Piston Sub-Assembly (Simultaneous Process)

Piston Feeding: On a separate pre-assembly plate, the piston assembly is fed into position.
Kufungwa Installation: A closure is then fed and installed onto the piston assembly.

Main Assembly and Final Steps

Final Combination: The inspected piston sub-assembly is transferred to the main assembly plate and mounted onto the prepared pump body sub-assembly.
Testing & Discharge: The fully assembled product undergoes a final inspection. Qualified products are discharged, while any defective products identified during the process are automatically rejected.

Chupa za Plastiki

Ubunifu wetu

Chupa za Plastiki

Maonyesho yetu

Chupa za Plastiki

Q1. Je! Wewe ni kampuni ya biashara au kiwanda cha utengenezaji?

A1: Sisi ndio kampuni ya ujumuishaji wa biashara na biashara, Tunayo vifaa vyetu wenyewe.

Q2: Jinsi ya kupata nukuu na kuanza uhusiano wa kibiashara na kampuni yako?

A2: Kwanza tunahitaji picha za kitu ambacho unahitaji mashine ili kuikusanya, Kisha tutakutumia karatasi ya ukusanyaji wa habari kwako, Baada ya habari yote kuthibitishwa, Tutakutumia nukuu yetu pamoja na wakati wa kujifungua na kuchora muundo.

Q3: Je! Ni kiwango gani cha chini cha agizo?

A3: MOQ yetu ni 1 seti ya mashine au mstari mmoja wa uzalishaji, Pia tunauza ukungu wa bidhaa kama kifurushi, Kiwango zaidi cha punguzo zaidi.

Q4: Je! Unaweza kutengeneza mashine za kusanyiko za moja kwa moja(mstari)?

A4: Chupa za Plastiki, tunaweza, Na tuna uzoefu katika utengenezaji wa mashine za kusanyiko moja kwa moja (mstari).

Q5: Je! Ni wakati gani wa kujifungua?

A5: Kawaida wakati wa kujifungua ni 2-3 miezi.

Q6: Vipi kuhusu masharti ya malipo?

A6: 50% mapema,40% Baada ya mashine kumaliza, na usawa 10% kabla ya kutoa. Je, unaweza kuuza nje bidhaa moja kwa moja, L/C isiyoweza kuepukika wakati wote inakubalika

Q7: Je! Unatoa usanidi wa tovuti na huduma za kuwaagiza?

A7: Chupa za Plastiki, Tunaweza kutoa usanikishaji wa tovuti na huduma za kuwaagiza, Lakini mnunuzi anapaswa kubeba tikiti za hewa za safari, malazi, na ruzuku ya kazi,na kadhalika.

Je, unaweza kuuza nje bidhaa moja kwa moja