The following procedures are commonly involved in the automated assembly of plastic emulsion pumps.
Silo supply is the transfer of individual plastic components from a silo to a conveyor belt, such as a pump body, pump cover, piston, và như thế. A vibratory tray can be used to automate this process. This can be automated using vibratory discs, feeding robots, and other devices.
Assembly Station – On the conveyor belt, components such as pump bodies, pump covers, pistons, and so on enter the automatic assembly station. The assembly station performs positioning and assembly using manipulators, assembly fixtures, and other tools. The assembly procedure can be carried out by manipulators picking up individual components for assembly or by components being automatically conveyed to the assembly station by the conveyor.
Inspection Station – The assembled pump enters the inspection station, where sensors and inspection equipment inspect the assembly’s quality. Sensors inspect the assembly’s quality, such as the fit of the pump body to the pump cover, the sealing of the piston to the pump body, và như thế.
Pumps that pass the quality inspection are automatically marked with a serial number and then transferred to the automatic packing station for packaging. Pumps that are not qualified will be marked as defective and removed.
Finished Product Output – Finished packaged products that are ready for storage or shipment are automatically output via conveyor belt.
Toàn bộ quá trình lắp ráp tự động bằng robot, cảm biến, và chương trình PLC để thực hiện vận hành tự động và kiểm soát chất lượng mà không cần sự can thiệp của con người, nâng cao đáng kể hiệu quả lắp ráp. Để duy trì hoạt động trơn tru của quá trình lắp ráp tự động, chúng ta cũng phải xem xét hệ thống cho ăn tự động, bảo trì thiết bị, phản hồi chất lượng, và hỗ trợ khác.
