1.Accurately locate products and screen out defects in a timely manner.
2.Touch screen operation, easy to use.
3.If there is a shortage of material, the light will flash and the screen will show the fault location.
| 功能 | Housing Components,墊片,Closure,噴嘴,遮住 & Tube Components Assembly |
|---|---|
| 組裝序列 | Pump core component feeding detection → gasket feeding detection → closure feeding detection → closure pressing in → head cap feeding detection → head cap pressing in → transparent cover feeding detection → insertion tube → suction tube detection → Finished&瑕疵產品 |
| 產品型號 | SR-MSM-09 |
| 送貨日期 | 90 日 |
| 生產能力 | 60-70 pcs / min |
| 維度(l* w* h) | 3.03.0mx1.8 米 |
| 電壓 | 標準 220v, 可自訂 |
規格
The automated assembly procedure for the pump head starts with the exact manufacture of its main components. 第一, the production line feeds and detects the pump core component to guarantee that everything begins on the right footing. To ensure the product’s seal, the system automatically installs the gasket and does a sensor check. A closure is then supplied, identified, and precisely pressed into position to secure the core components and finish the first assembly of the main pump body.
The process of adding the external components begins after the core section is assembled. The head cap is an important part for both function and appearance. It is placed and recognized before being pushed onto the pump body. To protect the internal parts and finish the product’s look, a clear cover is added, checked, and pressed in place. 在這一點上, the main construction and outside of the pump head are nearly finished.
最後, the procedure is completed with the installation of functional components and final quality control. The device puts the suction tube into the pump. It then quickly checks to make sure this important part is installed correctly. After all assembly stages are done, the line checks each unit. It uses the results from earlier checkpoints. 然之後, it automatically labels the unit as either finished (好) or defective. This closes the loop for both manufacturing and quality assurance.
我哋嘅工廠
我哋嘅設計
我哋嘅服務
生產流程
我哋嘅展覽
點解揀我哋
A1: 我哋係行業同貿易整合公司, 我哋有自己嘅製造商.
A2: 首先我哋需要嘅相片嘅相片，你需要部機組裝, 噉我哋會傳送一份資訊收集表畀你, 經過所有資訊黃素確認之後, 我哋會將我哋嘅報價傳送畀你，同埋送貨時間同設計圖.
A3: 我哋嘅 MOQ 係 1 一套機器或者一條生產線, 我哋亦都賣產品嘅模具作為包裝, 更多數量多.
A4: 係, 我哋可以, 而我哋係製造自訂自動組裝機嘅經驗 (線).
A5: 正常送貨時間係 2-3 一個月.
A6: 50% 事先,40% 機完之後, 同埋平衡 10% 交前. 電匯, 眼前無可撤銷嘅 L / C 都係可以接受嘅
A7: 係, 我哋可以提供現場安裝同委託服務, 但買家要承載行程機票, 住宿, 同埋勞動補貼,等.
產品諮詢
我哋將在 12 小時, 請注意帶有後綴嘅電子郵件 "@song-mile.com".
也, 你可以去 聯繫頁面, 它提供了更詳細嘅表格, 如果您對產品有更多疑問或希望獲得協商的包裝解決方案.
我哋嘅銷售專家將在 24 小時, 請注意帶有後綴嘅電子郵件 "@song-mile.com".
