無燄香薰擴散器嘅正確使用方法係乜嘢?

選擇一個安全嘅, 穩定嘅地方,遠離熱源. 避免礦物質堆積, 使用純淨/過濾水. 5-15 建議按儲液罐尺寸滴油. 唔好直接接觸濃縮油. 運行擴散器 30 分鐘到 2 加注前數小時. 定期清潔可以避免霉菌. 避免脫敏, 休息吓香氣.
蘆葦擴散瓶

Choose a suitable place. Place the diffuser on a level, stable surface away from anything that could be harmed by moisture. Make certain that it is out of reach of youngsters and dogs. Avoid placing near heat sources, as this can cause the perfume to change.

Use filtered or purified water. Mineral deposits in the diffuser may form if you use tap water. If feasible, use distilled, demineralized, or filtered water.

Depending on the size of your diffuser’s reservoir, add 5-15 droplets of essential oil. More than the recommended amount will not make it smell stronger and may reduce runtime. Begin with fewer drops and gradually increase to taste.

Because concentrated oils can irritate skin, avoid touching the oil directly. When adding them, use a toothpick or a pipette.

Diffusers should be run for 30 分鐘到 2 hours at a time. To avoid harm, most automatically shut off when they run out of water. When beginning, refill with clean water and add more drops of oil.

To avoid mold formation, clean on a regular basis. Wipe off the outside surfaces and descale or clean the reservoir and ultrasonic membrane according to the manufacturer’s instructions.

Take regular breaks from operating the diffuser to give your sense of scent a rest. This keeps you from becoming accustomed to the aroma.

共享:

更多帖子

奶油泵

AnAutomated Assembly Aachine的優勢和功能

自動化裝配機係現代生產中至關重要且不可或缺嘅部件. 其優點包括提高生產力, 降低成本, 更高嘅產品質素, 降低勞動風險, 更高嘅生產靈活性, 同更好嘅工作環境. 充分利用自動化技術嘅企業可以實現製造過程嘅智能化和精細化, 要佢哋能夠實現可持續和持續的增長和競爭優勢.

泡沫洗髮水瓶

膠樽係點樣生產嘅?

成個過程係自動化嘅, 每分鐘能夠製造数百甚至數千個膠樽. 生產塑料物體嘅最常見方法之一係注塑成型

寧波松邁工廠 (3)

塑料扳機噴霧機嘅組裝機如何工作?

成個裝配過程高度自動化, 帶機械臂, 傳送帶, 同精密嘅工位協同工作,以確保高效和一致嘅裝配. 該機器旨在處理大量生產,同時保持質量並最大限度咁減對體力勞動的需求.

獲取快速報價

我哋將在 12 小時, 請注意帶有後綴嘅電子郵件 "@song-mile.com".

也, 你可以去 聯繫頁面, 它提供了更詳細嘅表格, 如果您對產品有更多疑問或希望獲得協商的包裝解決方案.

數據保護

為咗遵守數據保護法, 我哋要求你查看彈出窗口中嘅要點. 繼續使用我哋嘅網站, 您需要點擊“接受” & 關閉桎梏. 你可以閱讀更多關於我哋嘅私隱政策嘅信息. 我哋記錄您的協議,你可以透過轉到我哋嘅私隱政策並單擊小部件嚟選擇退出.