Banner

How is the assembly of plastic lotion pumps automated?

The entire process of automatic assembly using a robot, sensors, and a PLC program to accomplish automatic operation and quality control without the need for human intervention, considerably enhancing assembly efficiency. To maintain the smooth operation of the automatic assembly process, we must also consider the automatic feeding system, equipment maintenance, quality feedback, and other assistance.
Lotion Pump1

The following procedures are commonly involved in the automated assembly of plastic emulsion pumps.

Silo supply is the transfer of individual plastic components from a silo to a conveyor belt, such as a pump body, pump cover, piston, and so on. A vibratory tray can be used to automate this process. This can be automated using vibratory discs, feeding robots, and other devices.

Factory 2

Assembly Station – On the conveyor belt, components such as pump bodies, pump covers, pistons, and so on enter the automatic assembly station. The assembly station performs positioning and assembly using manipulators, assembly fixtures, and other tools. The assembly procedure can be carried out by manipulators picking up individual components for assembly or by components being automatically conveyed to the assembly station by the conveyor.

Factory 3

Inspection Station – The assembled pump enters the inspection station, where sensors and inspection equipment inspect the assembly’s quality. Sensors inspect the assembly’s quality, such as the fit of the pump body to the pump cover, the sealing of the piston to the pump body, and so on.

Factory 1

Pumps that pass the quality inspection are automatically marked with a serial number and then transferred to the automatic packing station for packaging. Pumps that are not qualified will be marked as defective and removed.

Finished Product Output – Finished packaged products that are ready for storage or shipment are automatically output via conveyor belt.

Right Left Lotion Pump 8

The entire process of automatic assembly using a robot, sensors, and a PLC program to accomplish automatic operation and quality control without the need for human intervention, considerably enhancing assembly efficiency. To maintain the smooth operation of the automatic assembly process, we must also consider the automatic feeding system, equipment maintenance, quality feedback, and other assistance.

Share:

More Posts

Screw Cap

What will the push pull cap be used for?

The push pull design enables for quick access and one-handed closure, allowing consumers to enter and exit a variety of bottles with a single hand. They seal tightly to safeguard the contents during transportation or storage in between usage.

Reed Diffuser Bottle

What is the proper way to use a flameless aromatherapy diffuser?

Select a secure, stable place away from heat. To avoid mineral buildup, use purified/filtered water. 5-15 drops of oil per reservoir size are recommended. Do not come into direct contact with concentrated oils. Run the diffuser for 30 minutes to 2 hours before refilling. Mold can be avoided by cleaning on a regular basis. To avoid desensitization, take aroma breaks.

Foam Pump (1)

What kind of products use plastic foam bottles?

Plastic foam bottle packaging helps liquid products retain their frothy structure and consistency while allowing for easy and controlled dispensing. This sort of bottle is commonly used in cleansers, soaps, shampoos, and other foam-based products.

Get A Quick Quote

We will respond within 12 hours, please pay attention to the email with the suffix “@song-mile.com”

Also, you can go to the Contact Page, which provides a more detailed form, if you have more inquiries for products or would like to obtain a packaging solution negotiated.