Banner

What is the proper way to use a flameless aromatherapy diffuser?

Select a secure, stable place away from heat. To avoid mineral buildup, use purified/filtered water. 5-15 drops of oil per reservoir size are recommended. Do not come into direct contact with concentrated oils. Run the diffuser for 30 minutes to 2 hours before refilling. Mold can be avoided by cleaning on a regular basis. To avoid desensitization, take aroma breaks.
Reed Diffuser Bottle

Choose a suitable place. Place the diffuser on a level, stable surface away from anything that could be harmed by moisture. Make certain that it is out of reach of youngsters and dogs. Avoid placing near heat sources, as this can cause the perfume to change.

Use filtered or purified water. Mineral deposits in the diffuser may form if you use tap water. If feasible, use distilled, demineralized, or filtered water.

Depending on the size of your diffuser’s reservoir, add 5-15 droplets of essential oil. More than the recommended amount will not make it smell stronger and may reduce runtime. Begin with fewer drops and gradually increase to taste.

Because concentrated oils can irritate skin, avoid touching the oil directly. When adding them, use a toothpick or a pipette.

Diffusers should be run for 30 minutes to 2 hours at a time. To avoid harm, most automatically shut off when they run out of water. When beginning, refill with clean water and add more drops of oil.

To avoid mold formation, clean on a regular basis. Wipe off the outside surfaces and descale or clean the reservoir and ultrasonic membrane according to the manufacturer’s instructions.

Take regular breaks from operating the diffuser to give your sense of scent a rest. This keeps you from becoming accustomed to the aroma.

Share:

More Posts

Screw Cap

What will the push pull cap be used for?

The push pull design enables for quick access and one-handed closure, allowing consumers to enter and exit a variety of bottles with a single hand. They seal tightly to safeguard the contents during transportation or storage in between usage.

Foam Pump (1)

What kind of products use plastic foam bottles?

Plastic foam bottle packaging helps liquid products retain their frothy structure and consistency while allowing for easy and controlled dispensing. This sort of bottle is commonly used in cleansers, soaps, shampoos, and other foam-based products.

Get A Quick Quote

We will respond within 12 hours, please pay attention to the email with the suffix “@song-mile.com”

Also, you can go to the Contact Page, which provides a more detailed form, if you have more inquiries for products or would like to obtain a packaging solution negotiated.